🚧 We're migrating to New version of VHTV

[John78]

It is actually the line height which is too big. Vhtv said earlier that he’s looking into this issue

https://forum.spyhub.tv/t/were-migrating-to-new-version-of-vhtv/34386/217?u=john78

[Tevin12931]

Harmony kitchen cam 2 is broken (getting 404). Is this the one you’re changing to?

[John78]

Yes, that’s one of the cams i was referring to. It happens to be more than one thru my fav apartments

[Daleys]

Both cameras aren’t working.

[John78]

Now i’m starting to understand why the error message. I thought it is for the entire apartment

[Santos185648]

Ich versuche nochmal mein Problem mit der Timeline zu erklären . Nehmen wir an wir haben Cam 1 und 2. Ich bin auf Cam 1 und es ist 22:33:44 , ich Wechsel auf Cam 2 und es ist wieder 22:33:44 müsste ich nicht zumindest bei 22:34:00 Uhr sein ? Und dass gleiche Spiel nochmal wenn ich dann wieder wechseln will von Cam2 auf 1 bin ich wieder auf 22:34:44 Uhr . Es fängt wieder von da an bevor ich auf die andere cam gewechselt bin . Dass war früher nicht so . Als ich während der Timeline früher die Cams gewechselt hat es paar Sprünge nach vorne gemacht 20-30 Sekunden so kenne ich es , seit der neuen Version macht es die Rolle rückwärts . Keine Ahnung vielleicht hab doch ich bis heute die Timeline falsch verstanden . Aber so wie sie grad ist macht sie für mich kein Sinn

[Lazurus_aka_Virgil]

[Santos185648]

Beim Klicken der Timeline Foto 1

beim Cam Wechsel foto2

Wieder zurück zur Cam vor dem Wechsel Foto 3 bitte auf die Uhrzeit achten

[Lazurus_aka_Virgil]

not sure if this is the place to mention this ,but camera 2 and 12 in Kirill apartment are back to front

[Santos185648]

Du hast recht

[PacerColtsFan181062]

I’m having a hard time posting pics and using the timeline goodnight everybody I will try again tmrw morning hopefully it will be better

[Lazurus_aka_Virgil]

nite m8 enjoy and relax

[Santos185648]

Dann bin ich schon mal nicht allein mit den Problem. Wie benutz du VHT pc Telefon ?

[Aurelio114448]

Now, for every few minutes of replay watched, it will automatically skip a few minutes.
Is this only happening to me?

[John78]

I have noticed the same issue. It’s getting even worse when trying to pause the replay from the timeline as it doesn’t stop. I usually have multiple tabs opened, watch something for a little bit, pause and do something else. When i came back to the paused one, it’s no longer on the same moment as it was when i paused. Basically the pause function doesn’t work anymore

[Santos185648]

Ich habe ähnliche Probleme bei der Timeline zumindest . Bei mir wird aber zurück gespult

[Lazurus_aka_Virgil]

i think you will find that the timeline image and the timeline graph are working seperately . if you watch the the timeline graph on replay it jumps up due to time being added on the timeline graph and thats when the playback jumps ahead , if that makes sense

[jabbath1987]

Yes I can confirm that. Pause doesn’t work.

[OneNeighbourFromDK]

Yes I can, but then I wouldn’t be using the native resolution of the display.
It’s a wide display that does 3440x1440 pixels (it’s greater than a regular FullHD 1980x1080, but wider), and if I adjust the zoom of it, then it would fit, but, as mentioned, I will not be using the native resolution, that I need to regular work (development, 3d modelling, video editing, etc)

This snapshot is an example of the full width with the browser development tools opened, the streaming area is adjusted to the standard 1980 pixels wide…
If I disable the dev tools, than the streaming area would fit the full 3440 pixels, and proportionally it would not have enough vertical space to display the full streaming, neither allow me to adjust the width/height of it.

[Lazurus_aka_Virgil]

sorry m8 you lost me on the 2nd paragraph , after that i didnt have a scooby on what you was saying , sorry if my comment meant it was an easy solution ,